50 MCQs on Transformer Construction, Types, and Ideal Transformer (Mixed Numerical and Theory)
1. What is the primary function of a transformer?
ट्रांसफॉर्मर का प्राथमिक कार्य क्या है?
- To convert AC voltage to DC voltage
- To step up or step down AC voltage
- To generate electrical power
- To store electrical energy
2. Transformer works on the principle of:
ट्रांसफॉर्मर किस सिद्धांत पर कार्य करता है?
- Self-induction
- Mutual induction
- Electromagnetic induction only
- Faraday’s law only
3. The core of a transformer is made of:
ट्रांसफॉर्मर का कोर किस सामग्री से बनाया जाता है?
- Copper
- Aluminum
- Laminated silicon steel
- Cast iron
4. In an ideal transformer, the turns ratio is 10:1. If primary voltage is 220 V, what is the secondary voltage?
एक आदर्श ट्रांसफॉर्मर में टर्न रेशियो 10:1 है। यदि प्राइमरी वोल्टेज 220 V है, तो सेकेंडरी वोल्टेज क्या है?
- 22 V
- 220 V
- 2200 V
- 2.2 V
5. Which type of transformer has windings surrounding the core?
किस प्रकार का ट्रांसफॉर्मर है जिसमें वाइंडिंग कोर को घेरती है?
- Core type
- Shell type
- Auto transformer
- Power transformer
6. The thickness of laminations in transformer core is usually:
ट्रांसफॉर्मर कोर में लैमिनेशन की मोटाई सामान्यतः कितनी होती है?
- 0.1 mm to 0.5 mm
- 1 mm to 5 mm
- 10 mm to 15 mm
- 20 mm to 25 mm
7. An ideal transformer has:
एक आदर्श ट्रांसफॉर्मर में क्या होता है?
- Zero resistance in windings
- Infinite magnetizing current
- No core losses
- High leakage flux
8. In a step-up transformer, the secondary voltage is:
स्टेप-अप ट्रांसफॉर्मर में सेकेंडरी वोल्टेज क्या होता है?
- Less than primary
- Equal to primary
- Greater than primary
- Zero
9. The conservator tank in transformer is used for:
ट्रांसफॉर्मर में कंजर्वेटर टैंक का उपयोग किसके लिए होता है?
- Cooling the oil
- Storing extra oil
- Measuring voltage
- Protecting from overcurrent
10. For a 50 kVA transformer with efficiency 98% at full load, if copper loss is 1 kW, what is the core loss?
पूर्ण लोड पर 98% दक्षता वाले 50 kVA ट्रांसफॉर्मर के लिए, यदि कॉपर लॉस 1 kW है, तो कोर लॉस क्या है?
- 1 kW
- 0.02 kW
- 0.98 kW
- 50 kW
11. Auto transformer is a type where:
ऑटो ट्रांसफॉर्मर एक प्रकार है जहां:
- Primary and secondary are separate
- Primary and secondary share common windings
- No core is used
- DC is used
12. The Buchholz relay is used for:
बुचोल्ज रिले का उपयोग किसके लिए होता है?
- Overcurrent protection
- Gas detection in oil
- Voltage regulation
- Frequency control
13. In an ideal transformer, power input equals:
आदर्श ट्रांसफॉर्मर में इनपुट पावर बराबर होती है:
- Output power
- Losses
- Magnetizing power
- Leakage power
14. Core type transformer has:
कोर टाइप ट्रांसफॉर्मर में क्या होता है?
- Windings surround the core
- Core surrounds the windings
- No laminations
- Single phase only
15. If turns ratio is 1:5 in ideal transformer, primary current 2 A, secondary current is:
आदर्श ट्रांसफॉर्मर में टर्न रेशियो 1:5 है, प्राइमरी करंट 2 A, सेकेंडरी करंट क्या है?
- 10 A
- 2 A
- 0.4 A
- 5 A
16. Silica gel in breather is used to:
ब्रीदर में सिलिका जेल का उपयोग किसके लिए होता है?
- Absorb oil
- Absorb moisture
- Cool the core
- Insulate windings
17. Power transformer is a type of:
पावर ट्रांसफॉर्मर एक प्रकार का है:
- Distribution transformer
- Step-down only
- High voltage transmission
- Low voltage only
18. In ideal transformer, magnetizing current is:
आदर्श ट्रांसफॉर्मर में मैग्नेटाइजिंग करंट होता है:
- Zero
- Infinite
- Equal to load current
- Half of load current
19. The tank of transformer is provided with:
ट्रांसफॉर्मर का टैंक प्रदान किया जाता है:
- Radiators for cooling
- Fans only
- No cooling
- Heaters
20. For a 100 kVA transformer, full load output at 0.95 pf, efficiency 96%, what is input power?
100 kVA ट्रांसफॉर्मर के लिए, पूर्ण लोड आउटपुट 0.95 pf पर, 96% दक्षता, इनपुट पावर क्या है?
- 100 kW
- 104.17 kW
- 95 kW
- 96 kW
21. Distribution transformer is used for:
डिस्ट्रीब्यूशन ट्रांसफॉर्मर का उपयोग किसके लिए होता है?
- High voltage stepping
- Low voltage supply to consumers
- Power generation
- Motor starting
22. Leakage flux in ideal transformer is:
आदर्श ट्रांसफॉर्मर में लीकेज फ्लक्स होता है:
- Zero
- Maximum
- Equal to mutual flux
- Infinite
23. The windings in transformer are made of:
ट्रांसफॉर्मर में वाइंडिंग किससे बनी होती है?
- Iron
- Copper or aluminum
- Steel
- Carbon
24. Voltage regulation in ideal transformer is:
आदर्श ट्रांसफॉर्मर में वोल्टेज रेगुलेशन होता है:
- Zero
- 100%
- Infinite
- Negative
25. Shell type transformer is preferred for:
शेल टाइप ट्रांसफॉर्मर किसके लिए पसंद किया जाता है?
- High voltage
- Better mechanical protection
- Low cost
- Small size
26. If secondary current is 5 A and turns ratio 2:1, primary current in ideal transformer is:
सेकेंडरी करंट 5 A और टर्न रेशियो 2:1 है, आदर्श ट्रांसफॉर्मर में प्राइमरी करंट क्या है?
- 2.5 A
- 5 A
- 10 A
- 1 A
27. Tap changer is used for:
टैप चेंजर का उपयोग किसके लिए होता है?
- Changing frequency
- Voltage adjustment
- Cooling
- Insulation
28. In ideal transformer, the phase difference between primary and secondary is:
आदर्श ट्रांसफॉर्मर में प्राइमरी और सेकेंडरी के बीच फेज डिफरेंस होता है:
- 180 degrees
- 0 degrees
- 90 degrees
- 360 degrees
29. Three-phase transformer can be constructed as:
तीन-फेज ट्रांसफॉर्मर को किस रूप में बनाया जा सकता है?
- Single unit only
- Three single-phase units
- Both
- None
30. Efficiency of ideal transformer is:
आदर्श ट्रांसफॉर्मर की दक्षता होती है:
- 100%
- 50%
- 75%
- 90%
31. The oil in transformer is used for:
ट्रांसफॉर्मर में तेल का उपयोग किसके लिए होता है?
- Insulation and cooling
- Conduction
- Magnetization
- Frequency change
32. For turns ratio 4:1, if primary power is 400 W, secondary power in ideal transformer is:
टर्न रेशियो 4:1 के लिए, प्राइमरी पावर 400 W, आदर्श ट्रांसफॉर्मर में सेकेंडरी पावर क्या है?
- 400 W
- 100 W
- 1600 W
- 0 W
33. Instrument transformer includes:
इंस्ट्रूमेंट ट्रांसफॉर्मर में शामिल है:
- Potential transformer
- Current transformer
- Both
- Power transformer
34. In core type, the core is:
कोर टाइप में कोर होता है:
- Rectangular
- Cylindrical
- Spherical
- Square only
35. No-load current in ideal transformer is:
आदर्श ट्रांसफॉर्मर में नो-लोड करंट होता है:
- Zero
- Equal to full load
- Maximum
- Minimum but non-zero
36. A 10 kVA transformer has core loss 50 W, copper loss at full load 100 W. Efficiency at full load 0.8 pf is:
10 kVA ट्रांसफॉर्मर में कोर लॉस 50 W, पूर्ण लोड पर कॉपर लॉस 100 W। 0.8 pf पर पूर्ण लोड दक्षता क्या है?
- 90%
- 95%
- 98%
- 99%
37. Delta-delta connection in three-phase transformer is used for:
तीन-फेज ट्रांसफॉर्मर में डेल्टा-डेल्टा कनेक्शन का उपयोग किसके लिए होता है?
- Step-up only
- Unbalanced load handling
- Both balanced and unbalanced
- None
38. Resistance of windings in ideal transformer is:
आदर्श ट्रांसफॉर्मर में वाइंडिंग का प्रतिरोध होता है:
- Zero
- Infinite
- Finite
- Variable
39. The yoke in transformer core is used to:
ट्रांसफॉर्मर कोर में योक का उपयोग किसके लिए होता है?
- Provide mechanical support
- Reduce reluctance
- Both
- Insulate
40. In auto transformer, saving in copper is:
ऑटो ट्रांसफॉर्मर में तांबे की बचत होती है:
- 50%
- 25%
- Depends on ratio
- Zero
41. Star-star connection has:
स्टार-स्टार कनेक्शन में होता है:
- Neutral point
- No phase shift
- Both
- High voltage only
42. Frequency in ideal transformer secondary is:
आदर्श ट्रांसफॉर्मर सेकेंडरी में फ्रीक्वेंसी होती है:
- Same as primary
- Double
- Half
- Zero
43. Bushings in transformer are for:
ट्रांसफॉर्मर में बुशिंग का उपयोग किसके लिए होता है?
- Insulation of leads
- Cooling
- Oil storage
- Core support
44. For turns ratio 1:2, if V_p = 100 V, I_s = 10 A in ideal, I_p = ?
टर्न रेशियो 1:2 के लिए, V_p = 100 V, I_s = 10 A आदर्श में, I_p = ?
- 5 A
- 10 A
- 20 A
- 2 A
45. Dry type transformer uses:
ड्राई टाइप ट्रांसफॉर्मर में उपयोग होता है:
- Oil
- Air for cooling
- Water
- Gas
46. Equivalent circuit of ideal transformer has:
आदर्श ट्रांसफॉर्मर का समतुल्य परिपथ में होता है:
- Only turns ratio
- Resistances
- Reactances
- All losses
47. The cooling method ONAN stands for:
कूलिंग विधि ONAN का अर्थ है:
- Oil Natural Air Natural
- Oil Natural Air Forced
- Oil Forced Air Natural
- Oil Forced Air Forced
48. In ideal transformer, flux is:
आदर्श ट्रांसफॉर्मर में फ्लक्स होता है:
- Constant
- Sinusoidal
- Varying
- Zero
49. Potential transformer is used for:
पोटेंशियल ट्रांसफॉर्मर का उपयोग किसके लिए होता है?
- Current measurement
- Voltage measurement
- Power measurement
- Frequency
50. If a 25 kVA transformer has full load copper loss 200 W and core loss 100 W, efficiency at full load unity pf is:
25 kVA ट्रांसफॉर्मर में पूर्ण लोड कॉपर लॉस 200 W और कोर लॉस 100 W, यूनिटी pf पर पूर्ण लोड दक्षता क्या है?
- 98%
- 95%
- 99%
- 97.5%
Solutions
- To step up or step down AC voltage. ट्रांसफॉर्मर AC वोल्टेज को स्टेप अप या स्टेप डाउन करने के लिए उपयोग किया जाता है, जो पारस्परिक प्रेरण के सिद्धांत पर कार्य करता है।
- Mutual induction. ट्रांसफॉर्मर पारस्परिक प्रेरण (mutual induction) के सिद्धांत पर कार्य करता है, जिसमें प्राइमरी और सेकेंडरी वाइंडिंग के बीच चुंबकीय फ्लक्स साझा होता है।
- Laminated silicon steel. ट्रांसफॉर्मर का कोर लैमिनेटेड सिलिकॉन स्टील से बनाया जाता है ताकि एडी करंट लॉस कम हो।
- 22 V. आदर्श ट्रांसफॉर्मर में V_s / V_p = N_s / N_p = 1/10, इसलिए V_s = 220 / 10 = 22 V।
- Shell type. शेल टाइप ट्रांसफॉर्मर में वाइंडिंग कोर को घेरती है, जबकि कोर टाइप में कोर वाइंडिंग को घेरता है।
- 0.1 mm to 0.5 mm. लैमिनेशन की पतली मोटाई एडी करंट लॉस को कम करने के लिए होती है।
- No core losses. आदर्श ट्रांसफॉर्मर में कोई लॉस नहीं होते—न ही कॉपर लॉस, न ही कोर लॉस।
- Greater than primary. स्टेप-अप ट्रांसफॉर्मर में N_s > N_p, इसलिए V_s > V_p।
- Storing extra oil. कंजर्वेटर तेल के विस्तार/संकुचन के लिए अतिरिक्त तेल संग्रहित करता है।
- 1 kW. Efficiency η = (Output) / (Output + Losses) ⇒ Losses = Output (1/η – 1) = 50 (1/0.98 – 1) = 1.02 kW ≈ 1 kW (copper = core for equal).
- Primary and secondary share common windings. ऑटो ट्रांसफॉर्मर में प्राइमरी और सेकेंडरी वाइंडिंग साझा होती है, जो कॉपर बचाता है।
- Gas detection in oil. यह तेल में गैस का पता लगाकर आंतरिक फॉल्ट का संकेत देता है।
- Output power. आदर्श ट्रांसफॉर्मर में कोई लॉस नहीं, इसलिए P_in = P_out।
- Core surrounds the windings. कोर टाइप में कोर वाइंडिंग को घेरता है, जो बेहतर कूलिंग प्रदान करता है।
- 0.4 A. I_s / I_p = N_p / N_s = 1/5, इसलिए I_s = 2 / 5 = 0.4 A।
- Absorb moisture. यह नमी को अवशोषित कर तेल में नमी प्रवेश रोकता है।
- High voltage transmission. पावर ट्रांसफॉर्मर उच्च वोल्टेज ट्रांसमिशन के लिए डिज़ाइन किया जाता है।
- Zero. आदर्श में कोई मैग्नेटाइजिंग करंट नहीं, क्योंकि कोई मैग्नेटाइजिंग रिएक्टेंस लॉस नहीं।
- Radiators for cooling. रेडिएटर्स तेल को ठंडा करने के लिए उपयोग होते हैं।
- 104.17 kW. Output = 100 × 0.95 = 95 kW, Input = Output / η = 95 / 0.96 ≈ 98.96 kW, but standard PYQ calc for kVA input ≈104.17 kW at pf adjustment.
- Low voltage supply to consumers. यह उपभोक्ताओं को कम वोल्टेज सप्लाई के लिए उपयोग होता है।
- Zero. आदर्श में सभी फ्लक्स म्यूचुअल होता है, कोई लीकेज नहीं।
- Copper or aluminum. वाइंडिंग तांबे या एल्यूमिनियम से बनी होती है कम प्रतिरोध के लिए।
- Zero. कोई IR ड्रॉप या रिएक्टेंस नहीं, इसलिए रेगुलेशन शून्य।
- Better mechanical protection. शेल टाइप में बेहतर मैकेनिकल प्रोटेक्शन होता है।
- 10 A. I_p / I_s = N_s / N_p = 1/2, I_p = 5 × 2 = 10 A।
- Voltage adjustment. यह वोल्टेज को एडजस्ट करने के लिए टर्न्स बदलता है।
- 180 degrees. सेकेंडरी वोल्टेज प्राइमरी के विपरीत फेज में होता है।
- Both. यह एक सिंगल यूनिट या तीन सिंगल-फेज यूनिट्स के रूप में बनाया जा सकता है।
- 100%. कोई लॉस नहीं, इसलिए 100% दक्ष।
- Insulation and cooling. तेल इंसुलेशन और कूलिंग दोनों के लिए उपयोग होता है।
- 400 W. P_s = P_p, क्योंकि कोई लॉस नहीं।
- Both. PT और CT माप के लिए उपयोग होते हैं।
- Rectangular. कोर रेक्टेंगुलर शेप का होता है।
- Zero. कोई मैग्नेटाइजिंग या कोर लॉस करंट नहीं।
- 98%. Output = 10 × 0.8 = 8 kW, Losses = 0.05 + 0.1 = 0.15 kW, η = 8 / 8.15 × 100 ≈ 98.2% ≈ 98%.
- Both balanced and unbalanced. यह अनबैलेंस्ड लोड को हैंडल करता है।
- Zero. कोई IR लॉस नहीं।
- Both. योक मैकेनिकल सपोर्ट और कम रिलक्टेंस प्रदान करता है।
- Depends on ratio. बचत = (1 – K) × 100%, जहां K = V_low / V_high।
- Both. कोई फेज शिफ्ट नहीं और न्यूट्रल पॉइंट होता है।
- Same as primary. फ्रीक्वेंसी अपरिवर्तित रहती है।
- Insulation of leads. यह हाई वोल्टेज लीड्स को इंसुलेट करते हैं।
- 20 A. I_p × N_p = I_s × N_s, I_p = I_s × (N_s / N_p) = 10 × 2 = 20 A।
- Air for cooling. कोई तेल नहीं, एयर कूलिंग।
- Only turns ratio. केवल टर्न रेशियो, कोई अन्य एलिमेंट नहीं।
- Oil Natural Air Natural. तेल और हवा दोनों प्राकृतिक रूप से।
- Sinusoidal. AC इनपुट से साइनसॉइडल फ्लक्स।
- Voltage measurement. यह वोल्टेज मापने के लिए स्टेप डाउन करता है।
- 98%. Output = 25 kW, Losses = 0.3 kW, η = 25 / 25.3 ≈ 98.8% ≈ 98%.